Terminal strip wiring - easy and safe
P
EDK10200EV3 DE/EN/FR 5.0
PT
L
The terminal strips that are supplied have been tested according to the specifications of
z DIN VDE 0627:1986-06 (in parts)
z DIN EN 60999:1994-04 (in parts)
Features tested, amongst others, are: mechanical , electrical and thermal stress, vibration, damage
to conductors, loose conductors, corrosion and ageing.
píçé>
z Wire up the terminal strips before plugging them on!
z Plug on or pull off the strips ONLY when the device is disconnected from the supply
power!
z Unused terminal strips should also be plugged on - to protect the contacts!
8200vec015
Abb. 1-16
qáé>
The wiring may also be carried out without wire crimp cap - without any restrictions.
To Next Page
Loading...
