Lenze I95AE222F

Operang in
terfaces
Depending on the inverter, there are one or several opons for accessing the device
parameters that are available for customizing the drive task.
Simple access to the device parameters is provided by the Lenze Engineering
Tool »EASY Starter«. Connecon X16 is used as an interface for an engineering PC in this case.
Alternavely, the inverter can also be accessed via the oponal "PROFINET" network opons
with the X256 or X257 connecons, or EtherNet/IP with the X266 or X267 connecons.
Commissioning
Oper
ang interfaces
167