Lenze L-force 9400 Series - Product features; Terminals and interfaces

Preface
About this Hardware Manual
Products to which the Hardware Manual applies
1

14
EDS94SPP101 EN 7.1
Extension modules
c
E94 x Y x xx
Type / product range
9400 Servo Drives
Generation
A=1.
N = not relevant
Identification
Y=module
Module group
C = communication
I = I/O
F = feedback
M = memory
A=safety
Module identification
CA = CANopen
DN = DeviceNet
EN = Ethernet
EP = Ethernet Powerlink
ET = EtherCAT
PM = PROFIBUS MC
LF = digital frequency
1x = MM1x0memory module
2x = MM2x0memory module
3x = MM3x0memory module
4x = MM4x0memory module
x1 = MMx10 memory module with MC StateLevellicence
x2 = MMx20 memory module with MC HighLevellicence
x3 = MMx30 memory module with MC TopLevellicence
x4 = MMx40 memory module with PLClicence
A=SM0safetymodule
B = SM100 safety module
E = SM301safety module
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com