Power supply modules
General data and operating conditions
6
216
EDS94SPP101 EN 7.1
Mounting conditions
Mounting place
In the control cabinet
Mounting position Vertical
Mounting clearances
Above/below ≥ 80 mm / ≥ 120 mm
Observe the device-related
notes on mounting.
To the sides Side-by-side mounting without
any clearance
Connection conditions for DC power supply module
AC mains operation
Direct connection
DC-bus operation Direct connection of axis modules via terminals or busbar
system
More information can be found in the Hardware Manual,
chapter ”DC-bus operation”.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
