Lenze L-force 9400 Series - Page 243

Power supply modules
Wiring
Safety notes for the installation according to U
L
or U
R
6

243
EDS94SPP101 EN 7.1
6.6.2 Safety notes for the installation according t o U
L
or U
R
E94APNE0104/E94APNE0364
 Warnings!
ƒ Maximum surrounding air temperature: 55 °C.
ƒ For use in a pollution degree 2 environment.
ƒ Branch circuit protection:
Suitable for use on a circuit capable of delivering not more than 5000 rms
symetrical amperes, 500 V max.
ƒ Voltage of the fuses must at least be suitable with the input voltage of the
drive.
ƒ Use60/75°Ccopperwireonly,exceptforcontrolcircuits.
Branch circuit protection
Type Fuse [A]
E94APNE0104 15
E94APNE0364 40
E94APNE1004/E94APNE2454
 Warnings!
ƒ Maximum surrounding air temperature: 55 °C.
ƒ For use in a pollution degree 2 environment.
ƒ Branch circuit protection:
Suitable for use on a circuit capable of delivering not more than 18000 rms
symetrical amperes, 500 V max., when protected by H or K5 fuses.
ƒ Voltage of the fuses must at least be suitable with the input voltage of the
drive.
ƒ E94APNE1004: Use 60/75 °C copper wire only, except for control circuits.
ƒ E94APNE2454: Use 75 °C copper wire only, except for control circuits.
Branch circuit protection
Type Fuse [A]
E94APNE1004 100
E94APNE2454 250
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com