Mechanical installation
Mounting
Gearbox with compensation container for mounting position C
4
l
49
BA 12.0023−EN 6.0
Mounting
1. Mount gearbox in mounting position C (motor on top).
2. Remove the plug (9) from the intermediate cover (1).
3. Mount housing (4) using seal (3) and fixing screw (2) to intermediate cover (1)
(instead of the plug (9)).
4. Use hexagon nut (7) to bolt the breather element (6) to the cover (5).
5. Mount cover (5) and seal (8) to the housing (4).
( Stop!
For transport the compensation reservoir must be removed and the plug must
seal the gearbox (pos. 9).
To Next Page
Loading...
