Lenze L−force GST - Roller Bearing Grease

Maintenance
Maintenance operations
Roller bearing grease
7
l
55
BA 12.0023−EN 6.0
7.2.2 Roller bearing grease
The closed roller bearings on motors and gearboxes from Lenze are greased at the factory.
The following greases can be used for regreasing:
Ambient temperature Manufacturer Type
Gearbox roller bearing
GST, GFL, GKS, GKR, GKL −30...+80°C Klüber Petamo GHY 133 N
Gearbox roller bearing
GSS
−30...+80°C
−15...+60°C
Klüber
Klüber
Petamo GHY 133 N
Klüberplex BE 11−462
Motor roller bearing
−30 °C ... +70 °C
−40 °C ... +80 °C
Lubcon
Klüber
Thermoplex 2TML
Asonic GHY 72
The following lubricant quantities are required:
ƒ For fast−running bearings (motor and drive end of gearbox): fill approx. one−third of
the hollow space between rolling bodies with grease.
ƒ For slow−running bearings (in gearbox and driven side of gearbox): fill approx.
two−thirds of the hollow space between roller bearings with grease.