Lenze L−force GST - Page 53

Maintenance
Maintenance intervals
7
l
53
BA 12.0023−EN 6.0
Lubricants
Type Specification Ambient temperature Note
CLP 460 Oil on mineral basis with
additives
0 °C ... + 40 °C
CLP PG 460 Oil on synthetic basis
(polyglycol)
−20 °C ... + 40 °C Do not mix with mineral
oil!
CLP HC 220 USDA H1 Food−compatible oil on
synthetic basis
−20 °C ... + 40 °C Approval acc. to USDA−H1
CLP HC 320
CLP HC 220
Oil on synthetic basis
(synthetic hydrocarbon)
−25 °C ... + 50 °C Can be mixed with
residual mineral oil
CLP HC 46 Oil on synthetic basis
(synthetic hydrocarbon)
−40 °C...0 °C Good cold−flow behaviour
CLP PG 220 USDA H1 Food−compatible oil on
synthetic basis
20 °C ... + 40 °C Approval acc. to USDA−H1
Tab. 8 Overview of lubricant change
) Note!
In case of ambient temperatures <−20°C or >+40°C, please contact Lenze!
Observe increased starting torques at low temperatures!
GT−GNG−002.iso/dms
Fig. 14
0 Oil sump temperature [°C] 2 Synthetic oil CLP HC/CLP PG
1 Oil life/changing intervals [operating hours
h]
3 Mineral oil CLP