Lenze MSEMA Series - Product Information

Product
informaon
The new freedom in moon for engineers. Lenze Smart Products reduce the number of dier-
ent drives by up to 70 %. Without contactor and starter, with freely adjustable xed speeds
and many integrated funcons for technical material-handling applicaons. The Lenze Smart
motor also fulls the highest requirements regarding energy eciency and can be conven-
iently operated by means of a smart phone.
Reducon in the number of variants made easy
Before now, dierent output speeds (e.g. for dierent conveying speeds) were enabled by
dierent gearbox raos or, in the case of very large dierences, by means of the number of
pole pairs of the motors. This led to a large number of dierent drive variants..
Things are dierent with the Lenze Smart Products: Due to the possibility of freely adjusng
the motor speed within a range from 45 – 221.2 rpm, very dierent speeds can be enabled
with one single drive variant The cost and eort involved in design, selecon, procurement
and storage are thus reduced considerably.
Highlights
•
Ecient and usable worldwide
•
Usable in all mounng posions, reduces number of variants
•
Easy modicaon of the mechanical connecon on site reduces the number of variants
•
Freely adjustable speed reduces the number of dierent drives
•
Integrated so start funcon
•
Less wiring thank
s to electronic contactor and motor protecon funcon
•
Excellent energy eciency
•
Can be operated with an NFC-capable smartphone and Lenze app
•
Brake control unit oponal for low-wear brake control
Applicaon ranges
•
Con
veying and travelling drives
Product informaon
11