Lenze PROFIBUS-DP - PROFIBUS hardware for Lenze Controllers; MC-PBM; MC-PBS communication card

Lenze · Controller-based Automation · PROFIBUS® Communication Manual · DMS 4.6 EN · 11/2016 · TD17 21
4 The Lenze automation system with PROFIBUS
4.2 PROFIBUS hardware for Lenze Controllers
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.2 PROFIBUS hardware for Lenze Controllers
MC-PBM / MC-PBS communication card
•The MC-PBM communication card serves to connect a Lenze Controller as PROFIBUS master to
a PROFIBUS network.
•The MC-PBS communication card serves to connect a Lenze Controller as PROFIBUS slave to a
PROFIBUS network.
Using the Lenze Controller as a PROFIBUS slave
( 16)
[4-5] MC-PBM / MC-PBS communication card
Technical data of the MC-PBM / MC-PBS communication card ( 23)
Application
The MC-PBM / MC-PBS communication card is installed in the respective slot of the Lenze
Controller.
MC-PBx-001
A Front panel
B Printed circuit board
C Coding
D Connection of Lenze Controller
E PROFIBUS connection
( 24)
F LED status displays of the MC-PBM
communication card ( 48)
LED status displays of the MC-PBS
communication card ( 49)
0
1
3
2
PROFIBUS
MC-PBx
SYS
ST0
ST1
ST2
5
4
Example: Lenze Controller 3231 C with MC-PBM communication card
MC-PBM MC-PBM communication card
PBM1 PROFIBUS connection
( 24)