Lenze · Controller-based Automation · PROFIBUS® Communication Manual · DMS 4.6 EN · 11/2016 · TD17 49
10 Diagnostics
10.2 LED status displays of the MC-PBS communication card
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
10.2 LED status displays of the MC-PBS communication card
[10-2] LED status displays
MC-PBx-001_LED
LED Colour Status Beschreibung
SYS Green On Communication active
(cyclic data exchange with the PROFIBUS master)
Blinking 5 times per
second (5 Hz)
No communication
(no cyclic data exchange with the PROFIBUS master)
Blinking irregularly • Starting action: Missing or faulty configuration
• Runtime: Host watchdog time error
Yellow Blinking once per
second (1 Hz)
The device is in bootstrap loader mode and is waiting for the
firmware download
Blinking 5 times per
second (5 Hz)
The firmware download is executed.
Blinking irregularly A hardware or severe system error has been detected.
- Off No voltage supply or hardware is defective.
ST0 - Off No function
ST1 - Off No function
ST2 Red On The application program (bus-synchronous/device-controlled
communication mode) is no longer synchronous with the bus cycle.
Yellow On The slave has received parameter/configuration data from the
PROFIBUS master and is in the "DataExchange" state".
- Off No PROFIBUS communication
("DataExchange" state not reached)
To Next Page
Loading...
