Lenze Smart Motor m300 - Weights; Mounting

Weights
Transport
The transport weights can be found in the shipping documents!
Mounng
Transmission elements
•
Fit or remove transmission elements only using suitable equipment.
•
For ng the transmission elements use the center hole in the sha.
•
Avoid impacts and shocks.
•
In case of a belt drive, tension the belt in a controlled manner according to manufacturer informaon.
•
Be sure to carry out mounng in a manner free from distoron.
•
Compensate minor inaccuracies by suitable exible couplings.
Fastening
•
Use screws with a minimum property class of 8.8.
•
Observe prescribed starng torques.
•
Secure against unintended loosening.
•
In case of an alternang load, we recommend that you apply an anaerobic curing adhesive between
ange and mounng area.
Fastening of motor B14
NOTICE
Material damage caused by wrong screw length!
Motor winding can be damaged!
▶
Observe the max. screw-in depth starng from the ange contact area of the motor!
▶
Do not exceed the max. screw length (max. screw-in depth + thickness of the counterpart to the contact
area of the screw head)!
Motor code Flange B14 Thread Max. screw-in depth
mm
MSEMA□□063−42 FT75 M5 10
MSEMA□□080−32 FT100 M6 12
Mechanical installaon
Mounng
51