Lenze Smart Motor m300 - Electrical Installation; Important Notes

Electrical installaon
Important notes
DANGER!
Hazardous voltage!
On the power connecons even when disconnected from the mains: residual voltage >60 V!
▶
Disconnect the product from the mains and wait unl the motor is at a standsll.
▶
Make sure that the product is safely isolated from supply!
•
When working on energised products, comply with the applicable naonal accident prevenon
regulaons.
•
Carry out the electrical installaon in compliance with the relevant regulaons (e.g. cable cross‐secons,
fuses, PE connecon).
•
The manufacturer of the system or machine is responsible for adherence to the limits required in
connecon with EMC legislaon.
Electrical installaon
Important notes
52