Fel! Använd fliken Start om du vill tillämpa 見出し 1 för texten som ska visas här.
21
8. Pull the head release lever (green).
9. Close the cassette cover until it clicks.
(Removing the tube)
1. Open the cassette cover.
2. Push the head release lever.
3. Slide the switching lever (silver) until it
stops, then remove the tube.
Note: You don’t need to remove the ink
ribbon case when removing tube.
4. Pull the head release lever (green), then
close the cassette cover until it clicks.
Caution
Be careful when operating the Head release lever.
If the lever is slipped off during operating the lever, it might cause the injury.
To Next Page
Loading...
Need help?
General
