Letatwin LM390 User Manual

Fel! Använd fliken Start om du vill tillämpa 見出し 1 för texten som ska visas här.
41
1. Press RPT . The [REPEAT setting screen]
appears.
2. Press / key or Ten key to input the value of the
“REPEAT.”
3. Press ENTER .
Note: The default value of “REPEAT” can be changed in the “OPTION” setting.
6-8 SEQUENCE
Setting sequential (running) numbers. To activate “SEQUENCE” function, set the “START”
number and “END” number as below.
If the “SEQUENCE” is set, appears.
1. Press SEQ . The [SEQUENCE setting screen]
appears.
2. After selecting the type of the “SEQUENCE
” using
/ key, press ENTER .
The [START and the END number setting
screen] appears.
3. Press / key or Ten key to input the value of the
“START.”
4. Press ▼ key to move the cursor to the “END.” And
then Press / key or Ten key to input the value of
the “END.”
Selectable items: 8 SCALE=0 ～7777, 10 SCALE=0～9999, 16 SCALE=0～FFFF, ALPHABET=A～Z
▲ ２ ０ ．０ Ｃ Ｕ Ｔ ０ ０ １
Ａ Ｂ Ｃ
Ｒ Ｅ Ｐ Ｅ Ａ Ｔ ＝
２ Ｐ Ｃ Ｓ
B
P
▲ ２ ０ ．０ Ｃ Ｕ Ｔ ０ ０ １
Ａ Ｂ Ｃ
Ｒ Ｅ Ｐ Ｅ Ａ Ｔ ＝
１ Ｐ Ｃ Ｓ
B
P
▲ ２ ０ ．０ Ｃ Ｕ Ｔ ０ ０ １
Ａ Ｂ Ｃ
Ｓ Ｅ Ｑ Ｕ Ｅ Ｎ Ｃ Ｅ ＝
１ ０ Ｓ Ｃ Ａ Ｌ Ｅ
B
P
▲ ２ ０ ．０ Ｃ Ｕ Ｔ ０ ０ １
Ａ Ｂ Ｃ
Ｓ Ｔ Ａ Ｒ Ｔ ＝ ０
Ｅ Ｎ Ｄ ＝ ０
B
P
▲ ２ ０ ．０ Ｃ Ｕ Ｔ ０ ０ １
Ａ Ｂ Ｃ
Ｓ Ｔ Ａ Ｒ Ｔ ＝ １ ０
Ｅ Ｎ Ｄ ＝ ０
B
P
▲ ２ ０ ．０ Ｃ Ｕ Ｔ ０ ０ １
Ａ Ｂ Ｃ
Ｓ Ｔ Ａ Ｒ Ｔ ＝ １ ０
Ｅ Ｎ Ｄ ＝ ２ ０
B
P

Letatwin LM390 Specifications

General

Brand	Letatwin
Model	LM390
Category	Printer
Language	English