Letatwin LM390 User Manual

Fel! Använd fliken Start om du vill tillämpa 見出し 1 för texten som ska visas här.
24
3-4 REPLACING THE HALF CUTTER
1. Open the cassette cover.
2. Pull out the half cutter.
3. Engage the guide of the half cutter to the groove of the
half cutter holder and insert it completely.
Note: If the guide is not properly engaged in the groove,
the half cutter or the machine might be damaged.
Make sure to use the exclusive half cutter LM-HC340
(yellow color). LM-HC320(orange color) cannot be
used for LM-390A/PC.
Warning
Never touch the blade of the cutter.
The blade has sharp edge. Touching the blade might
cause injury.
3-5 INSERTING THE USB MEMORY (EXTERNAL MEMORY)
1. Open the USB memory slot cover at the
bottom of the machine.
2. Insert the USB memory completely.
(Check the top and bottom of the USB
memory.)
3. Close the USB memory slot cover.
● To remove the USB memory, press the
EJECT USB (SHIFT → BLOCK) first,
then remove it.
Blade
Guide
Half cutter
(yellow co
lor)
Groove of cutter holder

Letatwin LM390 Specifications

General

Brand	Letatwin
Model	LM390
Category	Printer
Language	English