Letatwin LM390 User Manual

Fel! Använd fliken Start om du vill tillämpa 見出し 1 för texten som ska visas här.
29
7. Pressing ENTER . Set the “START NUMBER”
and “END NUMBER.”
Input 1 8 in the “START.”
Press ▼ key to set the “END NUMBER.”
Input 1 D in the “END.”
Press ENTER .
8. Press BLOCK to create a new block, and then
input C O M .
9. Press RPT to set “REPEAT.” (See 6-7: REPEAT)
Press / key to set “2.” Press ENTER .
Note: It is also possible to input the value directly with
Ten key.
10. Press PRINT . (See 7: PRINTING)
[PRINTING RANGE setting screen] appears.
11. Press ENTER . [PRINTING LENGTH ALIGHNMENT screen] appears.
Press ENTER again to start printing.
12. The printed result is as shown below.
１ Ｓ Ｌ Ｄ Ｘ
▲ １ ５ ．０ Ｌ Ｉ Ｎ Ｅ ０ ０ ２
Ｓ Ｔ Ａ Ｒ Ｔ ＝ １ ８
Ｅ Ｎ Ｄ ＝ １ Ｄ
B
Ｘ Ｃ Ｏ Ｍ
▲ １ ５ ．０ Ｌ Ｉ Ｎ Ｅ ０ ０ ３
Ｔ Ａ Ｐ Ｅ ９ ｍ ｍ
ＡＵＴＯ ＳＴＤ ＳＴＤ ００１
B
N
Ｘ Ｃ Ｏ Ｍ
▲ １ ５ ．０ Ｌ Ｉ Ｎ Ｅ ０ ０ ３
Ｒ Ｅ Ｐ Ｅ Ａ Ｔ ＝
２ Ｐ Ｃ Ｓ
B
N
Ｘ Ｃ Ｏ Ｍ
▲ １ ５ ．０ Ｌ Ｉ Ｎ Ｅ ０ ０ ３
Ｔ Ａ Ｐ Ｅ ９ ｍ ｍ
ＡＵＴＯ ＳＴＤ ＳＴＤ ００２
B
N
［ Ｐ Ｒ Ｉ Ｎ Ｔ ］
Ｃ Ｏ Ｐ Ｉ Ｅ Ｓ ＝ １
Ｓ Ｔ Ａ Ｒ Ｔ Ｎ Ｏ ． ＝ １
Ｅ Ｎ Ｄ Ｎ Ｏ ． ＝ ３

Letatwin LM390 Specifications

General

Brand	Letatwin
Model	LM390
Category	Printer
Language	English