LevelOne EAP-200 - Secure Your AP; Ensure the intended VAP is Enabled

24
Article V. Secure Your AP
Different VAP may require different level of security. These instructions will guide the user through setting
up different types of security for a particular VAP. Simply repeat the following steps for other VAP with
security requirement.
Step 1: Ensure the intended VAP is Enabled
VAP Overview Page
On the VAP Overview page, check the table to confirm the VAP State. If it is Enabled, skip to Step 2.
If not, click on to proceed with VAP Configuration for that particular VAP.
VAP Configuration Page (VAP-1 as shown for example)
Select Enable for the VAP field and click SAVE. Click the Overview tab to return to the previous table