LevelOne EAP-200 - Page 41

41
• SNMP Configuration: By enabling SNMP function, the administrator can obtain the system information
remotely.
SNMP Configuration Fields
 Enable/ Disable: Enable or Disable this function.
 Community String: The community string is required when accessing the Management Information
Base (MIB) of the system.
o Read: Enter the community string to access the MIB with Read privilege.
o Write: Enter the community string to access the MIB with Write privilege.
 Trap: When enabled, events on Cold Start, Interface UP & Down, and Association & Disassociation
can be reported to an assigned server.
o Enable/ Disable: Enable or Disable this function.
o Server IP Address: Enter the IP address of the assigned server for receiving the trap report.
• System Log: By enabling this function, specify an external SYSLOG server to accept SYSLOG messages
from the system remotely.
System Log Fields
 Enable/ Disable: Enable or Disable this function.
 Server IP: The IP address of the Syslog server that will receive the reported events.
 Server Port: The port number of the Syslog server.
 Syslog Level: Select the desired level of received events from the drop-down menu.