EasyManua.ls Logo

LevelOne FBR-1161 - Page 30

LevelOne FBR-1161
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Dynamic IP Address
Encapsulation: 1483 Bridged IP LLC, 1483 Bridged IP VC-Mux, 1483 Routed IP
LLC(IPoA), 1483 Routed IP VC-Mux, check your ISP for proper connection type.
NAT (Network Address Translation): Select Enable or Disable from the drop-sown list
box. Refer to the NAT chapter for more details.
Default Route: Select Yes or NO to set route rule. It recommend by default setting.
TCP MTU Option: Maximum Transmission Unit. The size of the largest datagram that
the IP attempts to send through the interface.
Dynamic Route:
RIP Version: Select the RIP version from RIP-1, RIP-2B and RIP-2M.
RIP Direction: Select the RIP direction from None, Both, In Only and Out Only.
Multicast: IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to
establish membership in a Multicast group - it is not used to carry user data. The ADSL
Modem Series supports both IGMP version 1 (IGMP-v1) and IGMP-v2. Select Disabled
to disable it

Related product manuals