Network Camera User’s Manual
34/62
(6) “Key format” Choosing one of the following formats. ―HEX‖ is the default
setting.
- “HEX” digits consist of the numbers 0~9 and the letters A-F.
- “ASCII” is a code for representing English letters as numbers from 0-127
except ―, <, > and space characters that are reserved.
(7) “Default key/Network Key” Enter a key in either hexadecimal or ASCII
format. When selecting different key length, acceptable input length is listed as
following:
64 bits key length: 10 Hex digits or 5 characters.
128 bites key length: 26 Hex digits or 13 characters.
Note: When 22(―), 3C(<) or 3E(>) are input in network key, the key format can’t be
changed to ASCII format.
DDNS Setting
1. “Enable DDNS” This option turns on the DDNS function.
2. “ip-discovery” In the Register column, fill in the Host name (xxxx. ip-discovery),
Email, Key, and Confirm Key, then click Register. After a host name has been
successfully created, a success message will be displayed in the DDNS Registration
Result column and messaging E-mail.
3. “3rd party DDNS” This is enable or disable 3
rd
party DDNS.
4. “Provider” The provider list contains hosts that provide DDNS services. Please
connect to the service provider’s website to make sure the service charges.
5. “Host Name” If the User wants to use DDNS service, this field must be filled.
Please input the hostname that is registered in the DDNS server.
6. “User name” The Username or E-mail field is necessary for logging in the DDNS
server or notify the User of the new IP address.
Note: when this field is input as ―User name‖, the following field must be input as
―Password‖.
7. “Password” Please input the password or key to get the DDNS service.
8. “Finish” Click on this button to save modify settings for the DDNS service.
To Next Page
Loading...
