Opening accounts for new users
Protect Network Camera by passwords
The Network Camera is shipped without any password by default. That means everyone can
access the Network Camera including the configuration as long as the IP address is known. It is
necessary to assign a password if the Network Camera is intended to be accessed by others.
Type a new word twice in ○
1
to enable protection. This password is used to identify the
administrator. Then add an account with user name and password for your friends in ○
2
. Network
Camera can provide twenty accounts for your valuable customers or friends. You may delete
some users from ○
3
.
Build a security application
The Administrator can use the built-in motion detection to monitor any movement to perform many
1
2
3
To Next Page
Loading...
