System log
The Network camera support log the system messages on remote server. The protocol is
compliant to RFC 3164. If you have external Linux server with syslogd service, use “-r” option to
turn on the facility for receiving log from remote machine. Or you can use some software on
Windows which is compliant to RFC 3164.
Check “Enable remote log” and input the “IP address” and “port” number of the log server to
enable the remote log facility.
In the “Current log”, it displays the current system log file. The content of the log provides useful
information about configuration and connection after system boot- up.
To Next Page
Loading...
