NAME VALUE DESCRIPTION
scriptname
(r)
<text string shorter than 255
characters>
File name of script
<script.vssx>
0 Disable script enablescript
(r/w)
1
Enable script
Group: Syslog
NAME VALUE DESCRIPTION
0
disable remote log
enableremotelog
(r/w)
1 enable remote log
serverip
(r/w)
<IP address>
Log server IP address
serverport
(r/w)
<514>
Server port used for log
Camera Control
Note: This request requires camera control access privilege
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/camctrl.cgi
? [move=<value>][&focus=<value>]
[&iris=<value>][&speedpan=<value>][&speedtilt=<value>][&speedzoom=<value>]
[&speedapp=<value>][&auto=<value>][&zoom=<value>][&return=<return page>]
parameter value description
home Move to camera to home position
up Move camera up
down Move camera down
left Move camera left
move
right Move camera right
speedpan -5 ~ 5 Set the pan speed
speedtilt -5 ~ 5 Set the tilt speed
speedapp -5 ~ 5 Set the auto pan/patrol speed
To Next Page
Loading...
