<parameter>=<value>\r\n
[<parameter pair>]
Only the parameters that you set and readable will be returned.
Example: Set the IP address of server to 192.168.0.123
Request:
http://myserver/cgi-bin/admin/setparam.cgi?Network_IPAddress=192.168.0.123
Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network.ipaddress=192.168.0.123\r\n
Available parameters on the server
NOTE: The bold characters in table are the default value of each parameter.
Group: System
NAME VALUE DESCRIPTION
hostname
(r/w)
<text string shorter than 40
characters>
host name of server
<<Wireless>Network Camera >
0
Do not turn off the led indicator
ledoff
(r/w)
1 Turn off the led indicator
<yyyy/mm/dd>
year, month and date separated by slash.
<keep> keep date unchanged
date
(r/w)
<auto> Using NTP to sync date/time automatically
<hh:mm:ss>
hour, minute and second separated by
colon.
<keep> keep date unchanged
time
(r/w)
<auto> Using NTP to sync date/time automatically
ntp
(r/w)
<domain name or IP
address>
NTP server
<skip to invoke default server>
timezone -12 ~ 12 time zone, 8 means GMT +8:00
To Next Page
Loading...
