Step 1: Click “Browse” and select the binary file to be uploaded, ex.
Userland.jffs2.
NOTE: Do not change the upgrade file name, or the system will fail to
find the file.
Step 2: Pull down the upgrade binary file list and select the file you want to
upgrade; in this case, select “userland.jffs2.”
Step 3: Press “Upgrade”. The system will first check whether the upgrade
file exists or not, and then begin to upload the upgrade file. Subsequently, the
upgrade status bar will display on the page. When it runs to 100%, the upgrade
process is finished.
To Next Page
Loading...
