Wireless LAN Access Point Configuration
Universal Repeater mode setting page:
Parameter Description
ESSID
The ESSID (up to 31 printable ASCII characters) is the unique name
identified in a WLAN. The ID prevents the unintentional merging of two
co-located WLANs. Please make sure that the ESSID of all stations in
the same WLAN network are the same. The default ESSID is “default”.
User should assign ESSID in “AP mode”, “Station-Ad Hoc mode”, “AP-
Client mode”, “AP Bridge-WDS mode” and “Universal Repeater mode”.
Band
It allows user to set the AP fix at 802.11b or 802.11g modes. User also
can select B+G mode to allow the AP select 802.11b and 802.11g
connections automatically.
Channel Number
Select the appropriate channel from the list provided to correspond with
user’s network settings. Channels differ from country to country.
Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
There are 14 channels available.
User should assign Channel Number in “AP mode”, “Station-Ad Hoc
16
To Next Page
Loading...
