Wireless LAN Access Point Configuration
3.2.6 System Utility
From here, user can define the Access Point’s IP Address and Login Password and
enable the Access Point to be a DHCP Server.
Parameter Description
Current Password
Enter the current password (up to 15-digit alphanumeric string) of the
Access Point. The default password for the Access Point is 1234. Note
that the password is case-sensitive.
New Password
Enter the password (up to 15-digit alphanumeric string) user want to login
to the Access Point. Note that the password is case-sensitive.
Re-Enter Password
Reconfirm the password (up to 15-digit alphanumeric string) user want to
login to the Access Point. Note that the password is case-sensitive.
IP Address
Designate the Access Point’s IP Address. This IP Address should be
unique in user’s network. The default IP Address is 192.168.2.1.
36
To Next Page
Loading...
