Wireless LAN Access Point Configuration
Set Security
“Set Security” let user setup the wireless security for the data transmission between the
bridged access points in “AP Bridge-Point to Point mode”, “AP Bridge-Point to Multi-Point
mode” or “AP Bridge-WDS mode”. It provides “WEP 64bits”, “WEP 128bits”, “WPA (TKIP)”,
“WPA2 (AES)” encryption methods.
Parameter Description
Encryption
User can select “No encryption”,“WEP 64bits”, “WEP 128bits”, “WPA
(TKIP)” or “WPA2 (AES)” encryption methods.
Key Format
This is only used when user select “WEP 64bits” or “WEP 128bits”
encryption method. User may select to select ASCII Characters
(alphanumeric format) or Hexadecimal Digits (in the “A-F”, “a-f” and “0-9”
range) to be the WEP Key. For example:
ASCII Characters: guest
Hexadecimal Digits: 12345abcde
18
To Next Page
Loading...
