Leviton 71D03 - Page 42

42
Read Only Permission Register
Conguring the meter for a Read Only user allows data or conguration items to be
viewed, but not changed. This level of authorization is appropriate for
end-users, such as building owners who may not know the details of the
installation. It is recommended to use the Power Meter Viewer Utilities software to
congure permissions.
Read/Write Permission Register
Read/Write permissions allow users to read and write conguration items and to
reset the PINs. This level of authorization is required by any technician or user
who needs to correct setup errors in the meter. The default PIN (0000), allows
new users to reset the Read/Write PIN from either the VerifEye
®
web app or Power
Meter Viewer Utilities software.
Reading PINs over Modus or BACnet
Use the Power Meter Viewer Utilities software to directly report the Read Only and
Read/Write PINs under the Advanced Tab (passwords). The value reported by the
Power Meter Viewer Utilities software is the value entered on the web page or
LCD interface.
PINs are also accessible via registers, but are encoded so that reading the value
of the register through an RTU does not give the user the password. This feature
allows Leviton Manufacturing to look up forgotten PINs, if network access
is available.
Power Meter Viewer Utilities - Unrestricted Access
You can use the Power Meter Viewer Utilities software tool to read and write
conguration information to the meter without entering credentials.
NOTE: Power Meter Viewer Utilities software is the recommended tool for setting
up access restrictions. It allows users to test the function of the PINs without
locking themselves out to change the PIN.
6 COMMUNICATION AND VERIFICATION
WEB VERSION