10
You can set a timer for 1–12 hours.
1. Tap
repeatedly to select a time in
1-hour increments. When you’ve chosen
your time, the display will flash 3 times,
and the timer will start automatically.
When the air purifier is on, you can lock
the display to prevent settings from being
accidentally changed. Buttons will not
respond to being tapped.
1. Press and hold
for 3 seconds to lock/
unlock the display.
2.
will light up, and will flash 3 times.
This turns o the display lights on the air
purifier, including button lights and indicator
lights (except the Check Filter Indicator).
1. Press
to turn o the display.
2. Tap any button (except
or ) to
temporarily turn the display back on.
If you don’t press another button, the
display will turn back o after 3 seconds.
3. Press
to turn the display back on.
The display will stay on.
Note:
• You can change the fan speed at
any time while the timer is on.
• The timer will restart if the time
is changed.
• The air purifier will remember the
last timer setting while turned o,
but the timer will be cancelled and
need to be restarted.
• You can set a timer for 1–24 hours
in the VeSync app.
Note: The Check Filter Indicator will still turn
on and stay on if it’s time to check your filter
(see page 14).
2. When the timer is finished, the air purifier
will turn o.
3. To cancel a timer, tap
until the display
reads “
--H” and flashes 3 times.
Note:
• The timer indicator will count down
from your selected time, and the air
purifier will turn o when it’s finished.
• Press and hold for 2 seconds to
cycle through timer options faster.
• The timer indicator cannot be used to
select a time.
• The indicator will light up when active.
Note:
• When the display is locked, will
flash 3 times if you tap other buttons
on the display.
• Display lock can still be used when
the air purifier is in Standby Mode.
USING YOUR PURIFIER (CONT.)
Timer Display Off
Display Lock
To Next Page
Loading...
Need help?
General
