EasyManuals Logo

Levoit HERA LAP-C302S-WUSB User Manual

Levoit HERA LAP-C302S-WUSB
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
Sleep Mode operates quietly by using a fan
speed lower than fan speed 1.
1. Tap
to turn Sleep Mode on/o.
2. Sleep Mode will turn o the display
after 3 seconds if no other buttons are
pressed.
Auto Mode uses AirSight Plus, a smart
laser dust sensor inside the air purifier, to
adjust the fan speed automatically based
on air quality. For example, if the air
quality is bad, the fan will automatically
be set to high speed.
PlasmaPro™ Technology generates
positive and negative ions that bind with
pollutants and neutralize particulate
matter, odorous gases, aerosols, and
volatile organic compounds (VOCs).
The air purifier is in Standby Mode when it is
turned o, but plugged in.
Note: Display lock can be used while the
air purifier is in Standby Mode to keep the
air purifier from turning back on. The laser
dust sensor will still detect the surrounding
air quality and give you updates in the
VeSync app.
Note:
When the display is turned o, press
any button (except
) to turn the
display back on. If you don’t press
another button, the display will turn o
again after 3 seconds.
The Check Filter Indicator will still turn
on and stay on if it’s time to check your
filter (see page 14).
Note:
The air purifier will take 5 seconds
to detect the air quality each time
it is turned on. During this time, the
air quality indicator rings will be
blue. After 5 seconds, the air quality
indicator rings will change color
based on the detected air quality.
The VeSync app also supports
additional auto modes: Quiet Auto
Mode and Ecient Auto Mode
(see page 11).
USING YOUR PURIFIER (CONT.)
Air Quality Indicator Chart
Indicator
Color
Air
Quality
Auto Mode
Fan Speed
Blue Very Good Sleep Mode
Green Good Low
Orange Moderate Medium
Red Bad High
When the air purifier is plugged in and
turned o, it will remember its previous fan
speed, Sleep Mode, Auto Mode, Display
Lock, Display O, and Plasma settings.
When the air purifier is unplugged and
turned o, it will only remember its previous
fan speed, Sleep Mode, and Auto Mode.
Note: The air purifier will remember the
last timer setting chosen (1–12 hours),
but it will not automatically resume the
timer. You will need to reselect the timer
after the air purifier is turned back on.
Memory Function Auto Mode
Plasma Function
Standby Mode
Sleep Mode

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Levoit HERA LAP-C302S-WUSB and is the answer not in the manual?

Levoit HERA LAP-C302S-WUSB Specifications

General IconGeneral
BrandLevoit
ModelHERA LAP-C302S-WUSB
CategoryAir Cleaner
LanguageEnglish

Related product manuals