8
USING YOUR SMART
AIR PURIFIER
1. Plug in and tap to turn on the air
purifier. The fan will start on level I.
2. Optionally, tap
to change fan speed
between I, II, and III.
Note:
• The indicators are not buttons and
cannot be used to change the fan
speed.
• The fan speed indicators will light up
when active.
• Fan speed III is the loudest, but cleans
air the quickest.
• For best results, or to address a specific
air quality issue such as smoke, run the
air purifier at high speed (level III) for
15–20 minutes before using a lower
speed.
• To eectively clean air, keep windows
and doors closed while the air purifier
is on.
Note:
• To disconnect Wi-Fi, press and hold the
On/O button for 15 seconds until the
Wi-Fi indicator turns o. This will restore
the smart air purifier’s default settings
and disconnect it from the VeSync app.
• To reconnect, please follow the
instructions in the VeSync app for
adding a device.
3. Tap to turn o the air purifier.
Figure 2.1
Note: You must create your own VeSync
account to access voice assistants.
Note: Using the VeSync app allows you to
control your air purifier remotely and access
additional functions and features.
1. To download the VeSync app, scan the
QR code or search “VeSync” in the Apple
App Store® or Google Play Store.
2. Open the VeSync app. Log In or Sign Up.
3. Follow the in-app instructions to set up
your smart air purifier.
You can use the VeSync app to connect
your smart air purifier to
Amazon Alexa or
Google Assistant™. Please follow in-app
instructions to set up your voice assistant.
VeSync App Setup
Connect with Amazon Alexa or
Google Assistant™