Figure 4.14
Figure 4.15
h. Use a soft cloth and the included
cleaning brush to remove scale
from all parts. Figure 4.14
i. Rinse all parts until any vinegar
smell is completely gone.
Figure 4.15
Cleaning (cont.)
7. Dry all parts with a cloth. Make sure
all parts are completely dry before
reassembling or storing.
Reassembling
1. Flip the water tank over and place
the noise silencer back into the tank.
Figure 4.16
2. Place the water filter assembly back
into the tank and rotate it clockwise to
secure it in place. Figure 4.17
Figure 4.16
Figure 4.17
EN
18
To Next Page
Loading...
Need help?
General
