17
Figure 4.14
Figure 4.15
h. Use a soft cloth and the included
cleaning brush to remove scale
from all parts. [Figure 4.14]
i. Rinse all parts until any vinegar
smell is completely gone.
[Figure 4.15]
Cleaning (cont.)
7. Dry all parts with a cloth. Make sure
all parts are completely dry before
reassembling or storing.
Reassembling
1. Flip the water tank over and place
the noise silencer back into the tank.
[Figure 4.16]
2. Place the water filter assembly back
into the tank and rotate it clockwise to
secure it in place. [Figure 4.17]
Figure 4.16
Figure 4.17
To Next Page
Loading...
Need help?
General
