EN
9
Note: Make sure the True HEPA lter (the side with
the ribbon handle) is facing outward when you
insert the lter. [Figure 1.4]
Remove the True HEPA / Activated
Remove the plastic packaging from the
[Figure 1.3]
Figure 1.3
Figure 1.5
Figure 1.4
Figure 1.6
Figure 1.7
Make sure to align the tabs on the cover
with the slots on the bottom of the air
[Figure 1.5]
Insert the power adapter plug into the
[Figure 1.6]
38 cm / 15 inches of clearance from the
as curtains. [Figure 1.7]
38 cm /
15 in
To Next Page
Loading...
