Levolor InMotion - Motor Speed

9
Remote Control Guide
Programming
Motor Speed
This procedure will set the motor speed on all shades
assigned to a channel.
All motors have 3 speeds available and are set to the
slowest speed by default.
Set to Faster Speed
Press one P2 button in the battery compartment of
the remote until motor jogs x 1.
Press the left

up button. Motor jogs x 1.
Press the left

up button again. Motor jogs x 2.
Set to Slower Speed
Press one P2 button in the battery compartment of
the remote until motor jogs x 1.
Press the left

down button. Motor jogs x 1.
Press the left

down button again. Motor jogs x 2.
NOTE: If the motor has no response, it is already on the fastest
or slowest speed.
1
1
2
2
3
3
Home