What to do if Levolor Shutters shutter does not operate?
First, check if the indicator light on the remote control illuminates when you attempt to operate the shutter. If it doesn't, replace the remote control batteries. If the shutter still doesn’t operate, check the manual control button to ensure the shutter has power. If the shutter lacks power, replace its batteries.
General| Brand | Levolor |
|---|---|
| Model | Shutters Remote Control |
| Category | Remote Control |
| Language | English |
Connects shutters to an individual remote for command communication.
Stores and recalls preferred shutter positions, with one favorite per shutter.
Points where louvers stop; can be adjusted by resetting travel limits.
Button on shutter back used for app and remote programming.
Provides power to the shutter for operation with app and remote.
Recessed button on remote back for duplicating or resetting.
Instructions for removing the back cover and inserting AAA batteries.
Lists required tools: drill, screwdriver, pencil, and anchors.
Steps to choose a location, mark, drill, and attach the remote holder.
Process to program a remote to control specific shutters or groups.
Procedure to set and save a preferred louver position for a shutter.
How to use the remote to wake, select groups, and control shutter movement.
Steps to unassign a shutter from a programmed group.
Guide to copying settings from an original remote to a new one.
Erases all shutter programming, including group assignments.
Resets the top and bottom motor limits for shutter louvers.
Removes all programmed connections between the remote and shutters.
Details FCC compliance rules and user guidance on interference.
Covers Industry Canada regulations for radio transmitters and device compliance.
Provides information on how to obtain warranty service or details.
To Next Page
