13
Trouble Shooting
Remote Control Guide
TROUBLE SHOOTING
Problem
Shutter does not operate with the remote
control.
Solution
Make sure the Indicator light on the
remote control comes on when you try to
operate the shutter. If the Indicator light
does not come on, replace the batteries in
your remote control.
Note: The shutter can still operate using the
manual control button. If the shutter doesn’t
operate with the manual control button,
make sure it has power. If the shutter does
not have power replace the batteries.
Problem
The louvers do not open or close fully
or has an intermediate stop that is no
longer wanted.
Solution
Make sure the operation of the louver is not
obstructed. Reset the shading as described
in “Reset Shutter Programming” on page 11.
To Next Page
Loading...
