2
lippert.com 432-LIPPERT (432-547-7378) Rev: 10.20.23
Venta
TM
Pontoon
Anchor Winch
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0007416
Introduction
The Venta
™
Pontoon Anchor Winch is used to raise and
lower the anchor with ease at the touch of a button.
In this manual the term “rode” is used to define the length
of rope and chain that attaches the winch to the anchor.
The term “rope” is used to define the rope that is used in
conjunction with the chain to make up the rode.
Additional information about this product can be obtained
from lci1.com/support or by using the LippertNOW app.
Replacement kits can be ordered from https://store.lci1.
com/ or by using the LippertNOW app.
The LippertNOW app is available for free on Apple App
Store
®
for iPhone
®
and iPad
®
and also on Google Play
™
for Android
™
users.
App Store
®
and iPad
®
are registered trademarks of
Apple Inc.
Google Play
™
and Android
™
are trademarks of
Google Inc.
Safety
Read and fully understand all instructions before
installing or operating this product.
Consult the boat manufacturer for information regarding
the strength or suitability of the mounting location chosen
for this product.
Adhere to all safety labels.
ALWAYS PROPERLY STOW THE ANCHOR AND
RODE BEFORE LEAVING PORT/ANCHORAGE
ACCORDING TO PREVAILING SEA/LAKE/RIVER
CONDITIONS. ACCIDENTAL DEPLOYMENT MAY
CAUSE SIGNIFICANT PROPERTY DAMAGE OR
HARM INCLUDING DEATH.
WINCHES ARE INTENDED AND SUPPLIED FOR
ANCHOR CONTROL IN MARINE APPLICATIONS
AND NOT TO BE USED IN CONJUNCTION WITH
ANY OTHER USE.
KEEP LIMBS, DIGITS, CLOTHING, AND HAIR
CLEAR OF WINDLESS, RODE, AND ANCHOR
DURING OPERATION. SEVERE BODILY HARM
COULD RESULT.
NEVER DROP THE ANCHOR WHEN SWIMMERS OR
DIVERS ARE PRESENT.
WINCHES MUST NOT BE USED AS THE SOLE
MEANS OF SECURING THE ANCHOR TO THE BOW
FITTING, PARTICULARLY IN STORM CONDITIONS.
DO NOT USE THE WINCH FOR ANY PURPOSE
OTHER THAN DEPLOYMENT AND RECOVERY OF
THE ANCHOR.
ALWAYS PROPERLY STOW THE ANCHOR AND
RODE ACCORDING TO PREVAILING SEA/LAKE/
RIVER CONDITIONS. ACCIDENTAL DEPLOYMENT
MAY CAUSE SIGNIFICANT PROPERTY DAMAGE OR
HARM INCLUDING DEATH.
THE CIRCUIT BREAKER INCLUDED WITH THIS
PRODUCT MUST NEVER BE DEACTIVATED OR
BYPASSED. DOING SO MAY CAUSE DAMAGE TO
THE MOTOR AND CABLES FORM OVERHEATING.
FLYING DUST, DIRT, AND DEBRIS CAN CAUSE
SEVERE IRRITATION AND DAMAGE TO SOFT
TISSUE. USE APPROPRIATE PERSONAL
PROTECTIVE EQUIPMENT (PPE), SUCH AS SAFETY
GLASSES AND GLOVES BEFORE INSTALLATION.
To Next Page
Loading...
