Lexicon 960L Owner's Manual Addendum

Automation Package Addendum
9
960L
WORDCLK
SYSTEM!
METERS
CONTROL
Note: The CONFIG menu is only available when an optional second DSP card has been added to the system.
48K INT 48K AES 96K BNC96K AES96K INT48K BNC
CLEARPEAK DECAYPEAK HOLDPEAK
CONFIG!
AUTO!
1 - Configure DSP Card One
2 - Configure DSP Card Two
1 - System Information
2 - System Licenses
1 - New Session
2 - Session Library
3 - Close Session
4 - Save Session
5 - Session Setup
6 - Event List
7 - Drop In/Out
NOTESNAME
EDIT! FLOPPY!
1 - Format Floppy
2 - Backup Session
3 - Restore to Session
1 - Clear Session Bank #
2 - Delete Session
Figure 7: Control Mode Controls
SNAP!
MACHINE!
WRITE
UNDO / REDOSTOP READ
Automation Transport Controls
1 - Snap to Next Program
2 - Snap to End
1 - Set Machine # to OFF
2 - Set Machine # to READ
3 - Set Machine # to WRITE
4 - Set Machine # to UPDATE
5 - Set All to OFF
6 - Set All to READ
7 - Set All to WRITE
8 - Set All to UPDATE

Lexicon 960L Specifications

General

Brand	Lexicon
Model	960L
Category	Recording Equipment
Language	English