Need help?Do you have a question about the Lexicon ALEX - REV 1 and is the answer not in the manual?
Audio| audio input level | -30 dBu minimum |
|---|---|
| audio input impedance (stereo) | 50 kΩ unbalanced |
| audio input impedance (mono) | 25 kΩ unbalanced |
| audio output level (nominal) | -2 dBu |
| audio output level (maximum) | +8 dBu |
| audio output impedance | 600 Ω unbalanced |
Frequency Response and THD+N| frequency response (wet) | 20 Hz - 15 kHz, +1 dB to -3 dB |
|---|---|
| frequency response (dry) | 20 Hz - 20 kHz, +0.5 dB |
| THD+N (wet) | <0.05% @ 1 kHz |
| THD+N (dry) | <0.025% @ 1 kHz |
Dynamic Range and Conversion| dynamic range | 85 dB, typical, 20 Hz - 20 kHz bandwidth |
|---|---|
| conversion | 16 bit linear PCM encoding |
| sampling rate | 31.25 kHz |
Power| power requirements | 9 VAC, 1 A wall transformer provided |
|---|
Operating Environment| operating temperature | 32° to 104°F (0° to 40°C) |
|---|---|
| storage temperature | -20° to 170° F (-30° to 75°C) |
| relative humidity | 95% non-condensing |
Weight and Dimensions| dimensions | 19"W x 1.75"H x 4"D (483 x 45 x 102 mm) |
|---|---|
| weight | 2 lbs 11 oz (1.22 kg) |
Controls the proportion of processed and dry signals.
Controls the overall output level of the unit.
Adjusts the selected parameter value.
Sets the level of the incoming audio signal.
Selects DECAY, DELAY, or FX LVL for adjustment.
To Next Page