19
Advanced Programming Mode
To activate the Advanced Programming
Mode, simultaneously press the PARAM-
ETER/LEARN and the REGISTER/PRESET
buttons. The three front panel parameter
LEDs will light to indicate that the mode is
active.
Press the REGISTER/PRESET button at
any time to return to normal Reflex front
panel operation.
Instantly available when you want it, out
of your way when you don't, Advanced Pro-
gramming Mode is a hidden storehouse of
additional controls, each of which is de-
scribed in the following pages.
These three LEDs
will light to indicate
that APM is active.
DECAY
DELAY
FX LVL
PARAMETER/LEARN
VALUE
REGISTER/PRESET
GATE
INVERSE
SMALL ROOM
GUITAR STAGE
MUSIC CLUB
PIANO HALL
VOCAL HALL
LARGE HALL
To exit Advanced Programming Mode, press REGIST
ER/PRESET.
To enter Advanced Programming Mode, simultaneously press the
PARAMETER/LEARN button and the REGISTER/PRESET button.
Overview
The Advanced Programming Mode is an
exciting feature which lets you enhance the
capabilities of Reflex at the push of a button.
This mode provides a set of Utility functions
that let you adjust a variety of system set-
tings, and perform MIDI dumps right from the
front panel.
In addition, Advanced Programming
Mode gives you access to additional param-
eters for the currently running Reflex effect,
allowing much more subtle and complex
editing.
In this mode, the first 10 positions of the
REGISTER/PRESET knob are used to se-
lect the available parameters for the cur-
rently running effect. Positions 11-16 pro-
vide access to the Utility functions.
To Next Page
Loading...
