22
APM Parameter
Setting Name Display Range Actual Range
1 Mid Reverb Decay 1 to 16 .25-6.5seconds, typical
2 Predelay 1 to 128 0-246ms
3 Effects Level 1 to 128 0-100%
4 Bass Multiply -8 to +8 .3-2.5x, nominal
5 High Frequency Cutoff 1 to 16 321Hz-13.8kHz
6 Size 1 to 64 8-71 meters
7 Predelay Feedback -128 to +128 -99 to +99%
8 Diffusion 1 to 128 0-100 (arbitrary units)
9 Reflection Level 1 to 128 0-100%
10 Reflection Delay 1 to 128 40-168ms
A1
Hall
This is Lexicons’ famous hall reverb,
used to create spaces as large as a concert
hall, or as intimate as a small club. In Reflex
it is used to create the various halls and
rooms found in Presets 1-6.
The clean reverberation of the Hall algo-
rithm is designed to add spaciousness, while
leaving the source material unchanged. In
addition to general instrumental and vocal
applications, the Hall algorithm is a good
choice for giving separately recorded tracks
the sense of belonging to the same perfor-
mance.
Generally, you should set the Size control
first to establish the dimensions of the space
you are trying to create — or start with a
preset of a similar room size. (Note that
adjusting Size temporarily mutes the out-
puts.) The remaining parameters will deter-
mine the character of the space.
HF Cut Diffusion
Pdly Fbk
Reverberator
Size
Bass Mult
Mid
Reverb
Decay
Reflection Level
Reflection Level
Effects
Level
Predelay
Reflection
Delay
Reflection
Delay
To Next Page
Loading...
