Front Panel Overview
2
INPUT
Sets the level of the incoming
signal.
MIX
Controls the proportion of processed
(wet) to unprocessed (dry) signals sent
to the outputs.
REGISTER/PRESET
Button selects preset or register mode.
LED lights when register mode is selected,
turns off in preset mode.
Knob selects presets 1-16 or registers
1-128, depending on button setting.
STORE (+)/CLEAR (–)
Toggles Store and Clear functions. When "+" is
displayed, holding stores the current effect to dis-
played register. When "–" is displayed, holding
designates effect to be skipped in a footswitch step
sequence. In Advanced Programming Mode, clears
any patches to the displayed parameter.
INPUT
DECAY
DELAY
FX LVL
PARAMETER/LEARNSTORE (+)/CLEAR (–)
VALUE
REGISTER/PRESET
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
RICH PLATE
DRUMPLATE
VOCAL PLATE
FLANGER
CHORUS
CANYON
MULTI TAPS
RESONATOR
GATE
INVERSE
SMALL ROOM
GUITAR STAGE
MUSIC CLUB
PIANO HALL
VOCAL HALL
LARGE HALL
DYNAMIC
REVERBERATOR
MIDI
®
OUTPUTMIX
DRY WET
VALUE
Adjusts values of selected parameter.
Display of parameter values is indicated
by flashing of the selected parameter
LED.
PARAMETER/LEARN
Pressing selects front panel parameters: DECAY,
DELAY or FX LVL for adjustment with the VALUE
knob. Holding sets Reflex to the same channel as a
connected device, and activates patch assignment.
OUTPUT
Controls Reflex's output level.
DISPLAY
Numeric display of digits +1-128, and decimal point.
Displayed digits indicate ID number of currently
running effect, or parameter values. Decimal point is
used as edit indicator and patch indicator depending
on mode of operation.
To Next Page
Loading...
