27
Inverse Reverb is similar to gated reverb,
except that the reverberation envelope is
sharply tilted to provide a long rising attack
followed by a sharp cutoff.
This algorithm is an excellent choice for
percussion and the controls allow you to set
up anything from a subtle thickening or en-
hancement to a solid wall of reverb. Size
adjusts the perceived length of the inverse
effect. As this parameter changes both time
and density, it subtly affects the timbre.
This algorithm was used to create Preset
7.
APM Parameter
Setting Name Display Range Actual Range
1 Size 1 to 32 1-32 meters
2 Predelay 1 to 128 0-246ms
3 Effects Level 1 to 128 0-100%
4 – –– –– –
5 High Frequency Cutoff 1 to 16 321Hz-13.8kHz
6 Slope 1 to 32 1-32 (arbitrary units)
7 Predelay Feedback -128 to +128 -99 to +99%
8 Diffusion 1 to 128 0-100 (arbitrary units)
9 – –– –– –
10 – –– –– –
Inverse
A6
HF Cut Diffusion
Pdly Fbk
Inverse Room
Slope
Effects
Level
Size
Predelay
To Next Page
Loading...
