Lexicon REFLEX - REV 1 - Plate A2

23
This algorithm gives you all of the sonic
traits of a metal plate reverberator. Presets
9-11 provide classic plate effects for drums
and other percussive instruments, as well as
for a variety of broadband audio sources.
Plate effects are designed to be heard as
part of the music, enhancing and thickening
the source material.
In this algorithm the Size parameter sets
the rate of the build-up of diffusion after the
initial period (set by Diffusion), and acts as a
master control for decay. Because of this
link, you should set Size before adjusting
other parameters. (Note that adjusting Size
temporarily mutes the outputs.)
Plate
A2
APM Parameter
Setting Name Display Range Actual Range
1 Mid Reverb Decay 1 to 16 .25-6.5seconds, typical
2 Predelay 1 to 128 0-246ms
3 Effects Level` 1 to 128 0-100%
4 Bass Multiply -8 to +8 .3-2.5x (nominal)
5 High Frequency Cutoff 1 to 16 321HZ-13.8KHZ
6 Size 1 to 64 8-71 meters
7 Predelay Feedback -128 to +128 -99 to +99%
8 Diffusion 1-128 0-100 (arbitrary units)
9 – –– –– –
10 – –– –– –
HF Cut Diffusion
Pdly Fbk
Reverberator
Size
Bass Mult
Mid
Reverb
Decay
Effects
Level
Predelay