20
APM Utility Functions
When you are in Advanced Programming
Mode, positions 11-16 of the REGISTER/
PRESET knob select a variety of Utility func-
tions which can be performed simply by
selecting them and adjusting another single
front panel control. Each function has an
easily recognizable display code to indicate
which function is active.
The default status of those functions which
are memorized is as follows:
Function Default
Pc + (enabled)
Ch 1
F 1(momentary)
REGISTER/PRESET APM
Knob Position Display Code
11 Pc* Program Change Press STORE to enable (+) or
disable (–) Reflex reception of MIDI Program Change
messages.
12 Ch* Channel Turn VALUE to select channel (0 = OMNI, or
1-16) for incoming MIDI messages.
13 dA Dump All Press STORE to dump all registers.
14 dC Dump Current Effect Press STORE to dump current
effect.
15 F* Footswitch Turn VALUE to select footswitch type:
0 = latching; 1 = momentary.
16 A1-A8 Algorithm ID Display algorithm ID # of currently
running effect.
*These functions are memorized, and remain in effect until deliberately altered.
In APM, positions 11-16 of the REGISTER/
PRESET knob select the Utility functions. Each
function has an easily recognizable display code
to indicate which function is active.
9
10
8
7
6
5
4
3
2
1
RICH PLATE
DRUM PLATE
VOCAL PLATE
FLANGER
CHORUS
CANYON
MULTI TAPS
RESONATOR
GATE
INVERSE
SMALL ROOM
GUITAR STAGE
MUSIC CLUB
PIANO HALL
VOCAL HALL
LARGE HALL
Pc
dA
dC
A1-A8
Ch
F
11
12
13
14
15
16
To Next Page
Loading...
