45D0028 27
LOG PLACEMENT
8. Break up rock wool (ember material) into dime-sized pieces. Place evenly across burner surface and mesh of grate. See
Figures 35 and 36. Do not exceed 1" depth of coverage.
Lightly cover the airspace between logs and burner with small pieces rock wool for a better burner ame and
glow. See Figure 37.
Also, use additional small pieces of rock wool to lightly cover the airspace in front of burner. See Figure 37.
Figure 37 - Installing Rock Wool in air Space Between Logs and Burner
Burner
Rock Wool
To Next Page
Loading...
