Lexmark 101 - Copying an ID Card; Copying a Two-Sided Document; Enlarging or Reducing Images

3 From the printer control panel, press .
4 Press the up or down arrow button to scroll to Photo Reprint.
5 Press the left or right arrow button to select the desired photo size.
6 Press .
Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.
Copying an ID card
1 Load paper.
2 From the printer control panel, press .
3 Press the up or down arrow button to scroll to ID Card Copy.
4 Press .
5 Load the front side of the ID card facedown on the top left corner of the scanner glass, and then press to save
the image to the printer memory.
6 When prompted to copy the back side of the ID card, press to select Yes.
7 Load the back side of the ID card facedown on the top left corner of the scanner glass, and then press to start
printing.
Copying a two-sided document
1 Load paper.
2 Load an original document faceup into the ADF or facedown on the scanner glass.
3 From the printer control panel, press .
4 Press the up or down arrow button to scroll to 2-Sided Copies.
5 Press the left or right arrow button to scroll to 2 to 1 or 2 to 2.
• Select 2 to 1 to make single-sided copies of the two-sided document.
• Select 2 to 2 to make two-sided copies (like the original document).
6 Press .
7 Follow the instructions on the display.
Enlarging or reducing images
1 Load paper.
2 Load an original document faceup into the ADF or facedown on the scanner glass.
3 From the printer control panel, press .
4 Press the up or down arrow button to scroll to Resize.
5 Press the left or right arrow button to select the setting that you want.
Copying
58